Connecting The Hmi Device; Safety Instructions - Siemens F IWLAN Operating Instructions Manual

Mounting and connection

4.5 Connecting the HMI device

4.5 Connecting the HMI device
4.5.1

Safety instructions

CAUTION
Use only approved devices
Non-approved devices may cause malfunctions.
Only operate the HMI device with approved devices as specified in the section, "Overview
(Page 13)".
Malfunction possible
If the HMI device is switched on and lying on its front, any one of the operator controls can
trigger a malfunction.
Switch off the HMI device whenever possible.
Damage to the HMI device by foreign objects and liquids
Damage may occur to the HMI device if it is opened by unauthorized personnel. Foreign
bodies or liquids must not penetrate the interior of the HMI device or come into contact with
the printed circuit board.
The connection and battery compartments therefore may only be opened by professional
personnel for servicing.
NOTICE
Do not exceed the bridging time
If the main rechargeable battery is removed, the HMI device supplied by the rechargeable
buffer battery. The maximum bridging time is 20 seconds. If you exceed the bridging time,
the HMI device may switch off automatically. This triggers a shutdown or rampdown of an
integrated HMI device.
Do not exceed the bridging time!
Opening the connection or battery compartment
The HMI device does not meet degree of protection IP65 when the connection or battery
compartment is open.
Do not open the connection or battery compartment if dust or moisture can enter the
device. Close an open compartment completely.
See also
ESD guideline (Page 251)
66
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010