Siemens F IWLAN Operating Instructions Manual page 60

Planning the use
3.10 Planning information security
Checklist
Perform the following tasks for application planning and confirm the implementation of each
step in the following checklist. The tasks only conditionally required for PROFIsafe
compliance are marked
● Access point
Task
Select the installation site and antenna
characteristics of the access point in such a
manner that only the desired area is supplied
with wireless capacity. In this regard note that
wireless waves spread out horizontally as well
as vertically.
Install the access points at locations secured
against attack, for example, in suspended
ceilings.
This can prevent manipulation at the access
point or at the Ethernet connection to the LAN.
Always use cable connections to configure
access points.
Change the administrative password set.
Hidden SSID
Configure the access point so that the SSID of
the radio cell remains hidden.
Change the SSID setting.
60
italic
in the checklist.
Additional information
Access point operating instructions
"SINEMA E" planning program
(http://www.siemens.com/sinema)
–
–
"SCALANCE W-700" configuration
manual
(http://support.automation.siemens.
com/WW/view/en/32816761)
"SCALANCE W-700" configuration
manual
(http://support.automation.siemens.
com/WW/view/en/32816761)
Entering and deleting a password
(Page 114)
PRELIMINARY II
Wireless Teach Pendant F IWLAN V2
Operating Instructions, 08/2010, A5E02453837-01
1.7.2010
Check