Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 103

Description
The table has the following rows:
● State
Shows the status of the PLUG. The following are possible:
– ACCEPTED
– NOT ACCEPTED
– NOT PRESENT
– FACTORY
– MISSING
● Device Group
Shows the SIMATIC NET product line that used the C-PLUG previously.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
There is a PLUG with a valid and suitable configuration in the device.
Invalid or incompatible configuration on the inserted PLUG.
No C-PLUG is inserted in the device.
PLUG is inserted and does not contain a configuration. This status is also displayed
when the PLUG was formatted during operation.
There is no PLUG inserted. Functions are configured on the device for which a license
is required.
Configuring with Web Based Management
4.4 "System" menu
103