Configuration - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

– Conflict
– Defending
– Active
– Not supported
– Disabled
4.7.2.2

Configuration

On this page, you configure the subnet for the interface.
Description
The page contains the following:
● Interface (Name)
Select the required interface.
● Interface Name
Enter the name of the interface.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
been assigned, the device sends the message that it is using this IP address as of
now.
The interface is not enabled. The interface is attempting to use an IP address that has
already been assigned.
The interface uses a unique IP address. Another interface is attempting to use the
same IP address.
The interface uses a unique IP address. There are no collisions.
The function for detection of address collisions is not supported.
The function for detection of address collisions is disabled.
Configuring with Web Based Management
4.7 "Layer 3" menu
137