Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 104

Configuring with Web Based Management
4.4 "System" menu
● Device Type
Shows the device type within the product line that used the C-PLUG previously.
● Configuration Revision
The version of the configuration structure. This information relates to the configuration
options supported by the device and has nothing to do with the concrete hardware
configuration. This revision information does not therefore change if you add or remove
additional components (modules or extenders), it can, however, change if you update the
firmware.
● File System
Displays the type of file system on the PLUG.
● File System Size [Byte]
Displays the maximum storage capacity of the file system on the PLUG.
● File System Usage [Byte]
Displays the memory utilization of the file system of the PLUG.
● Info String
Shows additional information about the device that used the PLUG previously, for
example, order number, type designation, and the versions of the hardware and software.
The displayed software version corresponds to the version in which the configuration was
last changed. With the "NOT ACCEPTED" status, further information on the cause of the
problem is displayed.
● "Modify PLUG" drop-down list
Select the setting from the drop-down list. You have the following options for changing
the configuration on the C-PLUG:
– Write current configuration to PLUG
– Erase PLUG to factory default
Procedure
1. You can only make settings in this box if you are logged on as "Administrator". Here, you
decide how you want to change the content of the PLUG.
2. Select the required option from the "Modify PLUG" drop-down list.
3. Click the "Set Values" button.
104
This option is available only if the status of the PLUG is "NOT ACCEPTED" or
"FACTORY".
The configuration in the internal flash memory of the device is copied to the PLUG.
Deletes all the data from the PLUG and runs a low-level formatting function.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02