Certificates; Overview - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

3. Repeat the new password in the "Password Confirmation" input box.
4. Click the "Set Values" button.
Note
The factory setting for the password when the devices ship is as follows:
• admin: admin
If you log on the first time or log on after a "Restore Factory Defaults and Restart", you
will be prompted to change the password.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
4.8.2

Certificates

4.8.2.1

Overview

All loaded files (certificates and keys) are shown on this WBM page. You have the following
options for loading files on the device:
● System > Load&Save > HTTP
● System > Load&Save > TFTP
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.8 "Security" menu
147