Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 122

Configuring with Web Based Management
4.4 "System" menu
● "Device Password" input box
Enter the password with which the device logs on to the SINEMA RC Server. The
password is assigned when configuring the device on the SINEMA RC Server. You will
find further information on this in the Operating Instructions of the SINEMA RC Server.
● "Auto Firewall / NAT Rules" check box
– enabled
– disabled
● "Use Proxy" drop-down list
Specify whether a connection to the defined SINEMA RC Server is established via a
proxy server. Only the proxy servers can be selected that you configured in "System >
Proxy Server".
● "Verification Type" drop-down list
– Fingerprint: The identity of the server is verified based on the fingerprint.
– CA Certificate: The identity of the server is verified based on CA certificate.
● "Fingerprint" input box
Only necessary with the "Fingerprint" setting. Enter the fingerprint of the device. The
fingerprint is assigned during commissioning of the SINEMA RC Server. Based on the
fingerprint, the device checks whether the correct SINEMA RC Server is involved. You
will find further information on this in the Operating Instructions of the SINEMA RC
Server.
● "CA Certificate" drop-down list
Select the CA certificate of the server used to sign the server certificate. Only loaded CA
certificates can be selected.
122
The firewall and NAT rules are created automatically for the VPN connection. The
connections between the configured exported subnets and the subnets that can be
reached via the SINEMA RC Server are allowed. The NAT settings are implemented
as configured in the SINEMA RC Server.
You will need to create the firewall and NAT rules yourself.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02