Chapter 2 Preparations
6.
Remove the five screws to remove the bracket for the power supply unit.
7.
Mount the bracket for the redundant power supply unit with four screws (two flat fillister head screws
and two countersunk screws). The bracket is provided with the redundant power supply unit.
Countersunk
screws
8.
Mount the power cage to the chassis with four screws.
9.
Connect the four cables to the motherboard and backplane for hard disk drives.
106
Flat fillister
head screws
Express5800/R110f-1E User's Guide
1. Installing Internal Optional Devices
Countersunk
Flat fillister
screw
head screw
Secure with the cable tie.