Chapter 1 General Description
STATUS LED pattern
On (amber)
Flashing (amber)
4.7.3
LINK/ACT LED ( 1,
LINK/ACT LED at the front of the server lights green when it is connecting to LAN and flashes when
transmitting or receiving data on LAN. The number next to the icon indicates a LAN port number.
4.7.4
Disk Access LED (
DISK Access LED indicates the status of HDDs.
The following table lists DISK Access LED patterns.
DISK Access LED pattern
On (green)/Flashing green
On (amber)
Off
4.7.5
Optical Disk Access LED
The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
Description
A temperature alarm was detected.
A voltage alarm was detected.
A CPU temperature alarm was detected.
A CPU error was detected.
SMI timeout was detected
Sensor error was detected.
Failure of the power supply unit was
detected
A fan alarm was detected.
A temperature warning was detected.
A voltage warning was detected
An error was detected on either of the
hard disk drives when the RAID system is
configured.
2)
)
Hard disk drive or optical disk drive is being accessed.
Hard disk drive is failing.
Hard disk drive is halted.
Express5800/R110f-1E User's Guide
4. Names and Functions of Parts
Solution
Check the internal fan for dusts. Also check if
the fan unit is properly connected.
If the LED indication does not change when the
fans are normal, contact your sales
representative.
Contact your sales representative.
Turn the power off and then turn it on. If the
POST screen displays any error message, take
notes of the message, and contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Check if the internal cooling fan cable is
properly connected.
Check the internal cooling fan for dusts. Also
check if the fan unit is properly connected.
Contact your sales representative.
Description
45