Link/Act Led ( 1, 2, 3, 4); Optical Disk Drive Access Led (Option) - NEC Express5800/R120g-2M User Manual

Chapter 1 General Description
STATUS LED pattern
STATUS LED 1 STATUS LED 2
Off Blinking(amber) Power Supply Unit is failing (in power
Off On (amber)
4.7.3 LINK/ACT LED ( 1,
LINK/ACT LED on front panel indicates the status of LAN port.
LEDs 3 and
LINK/ACT LED pattern
On (green)
Blinking (green)
Off

4.7.4 Optical Disk Drive Access LED (option)

The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
32
Description
An uncorrectable memory error was
detected.
A PCI system error occurred
A PCI parity error occurred
A PCI bus error occurred.
redundant configuration).
A fan alarm was detected.
A temperature alarm was detected.
A voltage alarm was detected
One or more hard disk drives are failing
(excluding RAID0 or non-RAID
configuration).
Log collection stopped: A correctable
memory error has often occurred.
Power anomaly was detected
An abnormal temperature was detected.
An abnormal voltage was detected.
A CPU error was detected.
A chipset error was detected.
An uncorrectable memory error was
detected.
SMI Timeout was detected
Sensor error was detected.
An error occurred on Intel Node Manager
(one of the features of EXPRESSSCOPE
Engine 3).
2, 3, 4)
4 turns on, off, or flashes when an optional LAN riser card is installed.
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
Express5800/R120g-2M User's Guide
4. Names and Functions of Parts
Action
Check the internal fan or air inlets for dust.
When dust clings to them, remove it. If the
status remains the same after several minutes
pass, contact your sales representative.
Description