NEC Express5800/R120g-2M User Manual page 118

Chapter 2 Preparations
4. Connect power cords.
Use the specified power cords.
AC POWER LED blinks green when the power cord is connected to either of power supply units and
the other power supply unit's AC POWER LED goes on amber.
When the power cord is connected to it, AC POWER LEDs on both power supply units blink green.
Power supply unit 1
(standard)
AC POWER LED
5. Power on the server.
AC POWER LEDs go on green.
6. Confirm, by STATUS LED or on POST screen, that there are no errors related to the power supply units.
See Chapter 3 (1. POST Error Message) in "Maintenance Guide" for details on POST error messages.
If AC POWER LEDs are off, reinstall the power supply units. If the same error occurs, contact with your
sales representative.
118
Power cord for power
supply unit 1
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
Power supply unit 2
(additional)
AC POWER LED
Power cord for power
supply unit 2