4.7.9 Ac Power Led On Power Unit - NEC Express5800/R120g-2M User Manual

Chapter 1 General Description
N8104-156F 10GBASE-SFP+(2ch)+1000BASE-T(2ch) LOM Card
・When operating in 10GBASE-SFP+
SPEED LED pattern
On (green)
On (amber)
Off
・When operating in 1000BASE-T
SPEED LED pattern
On (amber)
On (green)
Off

4.7.9 AC POWER LED on Power Unit

The power unit is equipped with AC POWER LED.
AC POWER LED pattern
On (green)
Blinking (green)
On (amber)
Blinking (amber)
Off
The port is operating with 10GBASE-SFP+.
The port is operating with 1000BASE-SFP+ interface.
The port is not operating
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX
The port is operating with 10BASE-T interface.
AC POWER LED
Description
The server is powered on.
The power cable is connected and AC power is
supplied.
Cold Redundant feature is enabled (see page
112).
The power cable is not connected in redundant
power configuration.
Power unit is failing.
Power unit is failing.
The power is not supplied to the server.
Express5800/R120g-2M User's Guide
4. Names and Functions of Parts
Description
Description
Action
–
–
–
Connect the power cable.
Contact your sales representative.
Contact your sales representative.
Connect the power cable. If it is already
connected, contact your sales representative.
37