NEC Express5800/R120g-2M User Manual page 22

Chapter 1 General Description
Ready to use

No cable connection is required to install a hard disk drive, additional power supply unit, and redundant fan
unit (hot swap supported).

Slide rails for each installation
Many built-in Features

Redundant power supply system supported (valid when optional power supply unit is installed)

El Torito Bootable CD-ROM (no emulation mode) format supported

Software power-off

Remote power-on feature

AC-Link feature

Remote console feature

Power switch mask

Connector for display unit provided on front panel

Baseboard Management Controller (BMC) conforming to IPMI v2.0
Self-diagnosis

Power On Self-Test (POST)

Test and Diagnosis (T&D) utility
Easy setup

EXPRESSBUILDER (setup utility)

BIOS Setup utility (SETUP)
Maintenance features

Off-line Tools

Memory dump feature using DUMP Switch

Feature to backup and restore BIOS/BMC settings using EXPRESSSCOPE Profile Key
*1: Unsupported on Xeon processor E5-2603 v4 embedded models.
*2: Processor core speed depends on processor type, number and type of DIMMs installed.
*3: In 2-CPU configuration. Up to 768GB in 1-CPU configuration.
*4: When N8154-69 2.5-inch HDD cage is installed. 8 slots in standard configuration.
*5: When N8181-118F power unit is installed. Power supply unit N8181-121F/122F/123F is compliant to 80
Plus Platinum.
*6: Can be changed to PCI Express 3.0: 1 slot (x16 lanes) + PCI Express 3.0: 1 slot (x8 lane) or PCI Express
3.0: 1slot (x16 lanes) + PCI Express 3.0: 2slots (x4 lanes) by using optional PCI riser card.
*7: Can be changed to PCI Express 3.0: 1slot (x16 lanes) + PCI Express 3.0: 2slots (x4 lanes) by using
optional PCI riser card.
22
Express5800/R120g-2M User's Guide
3. Features