Removal; Installing Fbu For N8103-179 - NEC Express5800/R120g-2M User Manual

Chapter 2 Preparations
1.12.3

Removal

For removing the FBU for RAID Controller, reverse the installation procedure.
1.12.4

Installing FBU for N8103-179

Take the steps below to install FBU.
1. See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2. Put the FBU, provided as the standard
accessory of RAID Controller, on the support
bar. Then, mount the FBU bracket, provided
as the standard accessory of RAID
Controller, and secure it with a screw.
3. Connect the FBU control cable (750 mm),
provided as the standard accessory of RAID
Controller, to FBU.
4. Connect the FBU control cable (750 mm in
length) and Mini SAS cable to RAID
Controller.
5. Remove one screw from the blank cover on
the PCI riser card unit on which you are going
to mount the RAID Controller, then remove
the blank cover.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
73