Removing Front Bezel - NEC Express5800/R120g-2M User Manual

Chapter 2 Preparations
1.4

Removing Front Bezel

Remove the front bezel when pressing the POWER switch or removing Top Cover.
1. To unlock the bezel, insert the attached Bezel Lock Key into the key slot and turn the key while pressing
it lightly.
2. Hold the left end of front bezel and pull the right end toward you about 10 cm. Check that the hook in left
is removed as illustrated in the figure below and remove the left end from the chassis.
(1) Hold the
handle
(3) Pull the bezel
Hook
Views from above
Note
Be careful not to press the POWER Switch.
Important
If you fail to remove the front bezel properly, the front bezel might be
damaged.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
解除 ロック
Unlocked Locked
(2) Pull and rotate about 10
degrees
43