Link/Act Led ( 1, 2); Link/Act Led ( 2); Disk Access Led ( ); Optical Disk Access Led - NEC Express5800 Series User Manual

Chapter 1 General Description
Status LED pattern
On (amber)
Flashing (amber)
4.7.3
LINK/ACT LED ( 1,
The LED lights green when it is connecting to LAN and flashes when transmitting or receiving data on LAN.
The number next to the icon indicates a network port number.
4.7.4
Disk Access LED (
DISK Access LED indicates the status of the hard disk drive installed in the hard disk drive bay.
The LED lights green every time the hard disk drive is being accessed.
Lighting amber indicates that the hard disk drive is broken. The status of the broken hard disk drive can be
checked with DISK LED provided for each hard disk drive.
4.7.5

Optical Disk Access LED

The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
Explanation
A temperature alarm was detected.
A voltage alarm was detected.
A CPU temperature alarm was detected.
A CPU error occurred.
An error is detected with Node Manager
SMI timeout is detected
Sensor error was detected.
The power supply unit is broken.
A fan alarm was detected.
A temperature warning was detected.
A voltage warning was detected
One or more hard disk drives are broken.
2)
)
Tips
When RAID Controller (N8103-149/150/151) is used, Disk Access LED lights
amber immediately after the server is powered on or reset, however, it is not a
failure.
Express5800/R110e-1E User's Guide
4. Names and Functions of Parts
Solution
Check the internal fan for dusts. Also check if the fan
unit is properly connected.
If the LED indication does not change when the fans
are normal, contact your sales representative.
Contact your sales representative.
Turn the power off and then turn it on. If the POST
screen displays any error message, take notes of the
message, and contact your sales representative.
Contact your sales representative.
Contact your sales representative.
Check if the internal fan cable is properly connected. If
the LED indication does not change when the fans are
normal, contact your sales representative.
Check the internal fan for dusts. Also check if the fan
unit is properly connected.
If the LED indication does not change when the fans
are normal, contact your sales representative.
Contact your sales representative.
43