NEC Express5800 Series User Manual page 29

Chapter 1 General Description
Expandability
•
PCI Express 3.0 (x8 lanes) *3: 2 slots (low profile)
•
Large capacity memory of up to 32 GB
•
Hard disk drive bay
2.5-inch drive model: 6 slots
3.5-inch drive model: 4 slots
•
Optical disk drive bay provided as standard
•
USB2.0 interface
•
Three LAN ports (one for management LAN)
Ready to use
•
Hard disk drives can be installed with one-touch setup, which requires no cables (hot swap supported)
Many built-in Features
•
El Torito Bootable CD-ROM (no emulation mode) format supported
•
Software power-off
•
Remote power-on feature
•
AC-Link feature
•
Remote console feature
•
Power switch mask
•
Baseboard Management Controller (BMC) conforming to IPMI v2.0
Self-diagnosis
•
Power On Self-Test (POST)
•
Test and Diagnosis (T&D) utility
Easy setup
•
EXPRESSBUILDER (setup utility)
•
SETUP (BIOS SETUP utility)
Maintenance features
•
Off-line tools
•
Memory dump feature using the DUMP switch
•
Feature to back up and restore BIOS/BMC settings using the EXPRESSSCOPE profile key
*1: Celeron processor G540 and Pentium processor G640 is running at 1066MHz.
*2: If the connection is on board, Port 0/1 operation is 6Gb/s. Other ports operation is 3Gb/s.
*3: PCIe 3.0 is only supported for Xeon processor. Other processor operates as PCIe 2.0.
Express5800/R110e-1E User's Guide
3. Standard Features
29