Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations
(1) When using the optional controller (N8103-128/149/150/151/160)
For details, refer to the manual that comes with optional RAID Controller (N8103-128/149/150/151/160).

Removal

1.11.4
To remove a riser card, reverse the installation procedure. Hold the card firmly and remove it. When
removing it, have another person hold the server so that the server does not move.
If using the server while the card is removed, attach the blank cover that comes with the riser card.
Important
The optional RAID Controller is extremely sensitive to static electricity.
Touch metal part of the server such as the frame to discharge static
electricity from your body before handling a RAID Controller. Do not touch
the terminal part or parts of RAID Controller board with bare hands or do not
place the board directly on a desk. For detailed explanation on static
electricity, refer to Chapter 2 (1.2 Anti-static Measures).
Note
• When installing an optional RAID Controller, start the BIOS Setup utility, select
PCI Configuration from the Advanced menu, and then make sure that the
parameter of PCI Slot xx ROM (xx is PCI slot number) is set to Enabled.
• When connecting a RAID Controller, set the boot priority to 8th or higher in the
Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the
configuration menu for RAID Controllers cannot be launched.
Important
Do not change the mode to hibernate when building a RAID System.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices
85