NEC Express5800 Series User Manual page 62

Chapter 2 Preparations
(c) Installation
For the instruction of installing the optional RAID Controller (N8103-128/149/150/151/160), refer to Chapter 2
(1.11 PCI Card).
(d) Removal
To remove the optional RAID Controller (N8103-128/149/150/151/160), reverse the installation procedure.
If you intend to use with the card removed, be sure to attach the slot cover attached to the riser card. The slot
cover must be screwed into place.
62
Important
When connecting a RAID Controller, set the boot priority to 8th or higher in
the Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the
configuration menu for RAID Controllers cannot be launched.
Express5800/R110e-1E User's Guide
1. Installing Internal Optional Devices