Chapter 2 Preparations
1.16.1 Installation
Install a hard disk drive by using the following procedure. Follow the same installation procedure for other
bays.
1.
See Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Locate the slot where you install the hard disk drive.
The server provides six slots as standard. Install hard disk drives in ascending port number order.
3.
Remove the dummy trays.
4.
Unlock the handle of the tray.
Important
In the RAID system, install the hard disk drives that have the same
specifications (capacity, rotational speed and interface). HDD and SSD can
not use together in the same RAID system.
Important
• Keep the dummy trays for future use.
• Keep the dummy trays installed where hard disk drives are not installed.
Express5800/R110f-1E User's Guide
1. Installing Internal Optional Devices
99