Table of Contents
Advertisement
Chapter 3 Setup
3.
EXPRESSSCOPE ENGINE 3
3.1
Overview
EXPRESSSCOPE Engine 3 provides useful features by using Baseboard Management Controller (BMC).
EXPRESSSCOPE Engine 3 monitors the power unit, cooling fans, temperature, and voltage of the server. If the
management LAN connector is connected to the network, you can remotely perform the following features by
using a web browser or SSH client.
•
Managing the server
•
Remotely controlling the keyboard, video, and mouse (KVM)*
•
Remotely accessing a CD/DVD/floppy disk/ISO image/USB flash drive*
* To use this feature, the optional license for remote management (N8115-04) is required.
To enable this feature, a USB mass storage device, such as Remote FD, Remote CD/DVD, Remote USB
flash drive or Virtual Flash is virtually connected.
About N8115-04 Remove KVM and Media License
More than one removable drives other than the actual drives are displayed on the operating system of the server. These
added removable drives are the virtual removable drives reserved for the remote media feature of EXPRESSSCOPE Engine
3 (*1).
Fig. 1 Example of Windows Server 2008 R2 Computer Folder (*2)
Fig. 2 Example of Windows Server 2008 R2 Server Manager (*2)
*1 This feature enables you to use FD/CD/DVD drives, ISO images or USB flash drives on "PC for Management" as virtual
drives that are connected to the server.
*2 The number of drives and the drive character are different depending on hardware configurations.
132
Express5800/R110f-1E User's Guide
3. EXPRESSSCOPE ENGINE 3
Advertisement
Table of Contents
