Maintenance; Changing The Cutter Heads; Storage - Silvercrest SFR 2.4 A1 Operating Instructions Manual

Risk of personal injury!
When replacing the cutter foil retainer 1 do not use
force and do not press on the cutter foil!
• Take hold of the cutter foil retainer 1 on the sides
and press it down until the securing tabs engage.
• Replace the protective cap w.
• Clean the housing and the power adapter 9 with
a moist cloth.
• Clean the long-hair trimmer q after every use with
the brush 8.
Lubricate the long-hair trimmer q approx. every 6
months with a drop of sewing machine oil.

Maintenance

Shaving quality is mostly determined by the condition
of the cutter parts. As these are subject to wear and
tear, an opportune exchange is necessary.
We recommend replacing the cutter foil retainer 1
and the cutter heads annually. Always replace the
cutter foil retainer 1 and the cutter heads at the
same time.
If...
- ... the shave is noticeably unsatisfactory,...
- ... you must run the razor over the same spot seve-
ral times to obtain an acceptable result,...
- ... shaving takes noticeably longer,...
- ... damage is visible on the cutter blades,...
.... the cutter foil retainer 1 and the cutter heads
must be exchanged.
Replacement cutter foil retainers and cutter heads
can be ordered with the enclosed order form.

Changing the cutter heads

• Remove the cutter foil retainer 1, as described
in "Wet cleaning".
• Grasp the s s i i d d e e s s of a cutter head and carefully pull
it upwards.
• Repeat this procedure with the second cutter head.
• Attach the new cutter heads onto the mountings.
Ensure that they engage and are seated firmly.
• Take hold of the cutter foil retainer 1 on the sides
and press it down until the securing tabs engage.

Storage

Attention!
Never keep the razor in its storage case 7 when the
battery is being charged! Risk of overheating!
If you do not intend to use the razor for an extended
period, or you are transporting it, place it in its storage
case 7.
Ensure that the razor is clean and completely dry.
Store the razor at a clean and dry location.
- 6 -