RRU3931E
Installation Guide
1.6.2 Installing a RRU3931E on a Pole
This section describes the procedure and precautions for installing a RRU3931E on a pole.
Procedure
Step 1 Route two steel belts separately through the up and down mounting holes on the Mounting
bracket, but do not route the steel belts through the buckles. See
Figure 1-9 Routing steel belts
(1) Visible window
Step 2 Fit the Mounting bracket onto the target pole. See
Issue Draft A (2016-03-30)
NOTE
Before installing a steel belt, check the rotation axis from the visible window. If the rotation axis is not
connected to the end of the bolt, loose the bolt and adjust the rotation axis to the end of the bolt. The
position of the rotation axis is shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
1-11.
Figure
1-10.
1 RRU3931E Installation Guide
Figure
1-9.
14