Table of Contents
Advertisement
RRU3931E
Installation Guide
Step 3 Connect the Smart-type N male connector at one end of the RF jumper to the RF port on the
RRU3931E.
When installing an RF jumper, hold tightly the metal part (in the red dotted circle in
1-36) of the Smart-type N male connector and push the connector upwards. A slight crack
will be heard when the connector is properly installed. See
Issue Draft A (2016-03-30)
Figure 1-35 Removing screws
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 RRU3931E Installation Guide
Figure
1-36.
Figure
38
Advertisement
Table of Contents
