Table of Contents
Advertisement
RRU3931E
Installation Guide
Procedure
Step 1 Feed both connectors of the cable into the ports of the cable tester.
Step 2 After the connectors are properly inserted, turn on the tester. If the indicators from 1 to G turn
on simultaneously, you can infer that the pins work normally and the wires are correctly
connected.
Figure 1-53 Testing the conduction and connections of wires
Step 3 Gently shake the connector and repeat
good contact with the core wires and Ethernet ports, as shown in
Issue Draft A (2016-03-30)
NOTE
Turn the switch to the S position and check whether the indicators turn on simultaneously, as shown in
Figure
1-53.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2
to check whether the metal contact strips are in
1 RRU3931E Installation Guide
Figure
1-54.
51
Advertisement
Table of Contents
