Table of Contents
Advertisement
RRU3931E
Installation Guide
Figure 1-40 Components of an RJ45 connector and an Ethernet cable
(1) Core wire
(4) Outer jacket
Procedure
Step 1 Remove the outer jacket (25 mm) of the Ethernet cable, tip the braided layer outwards evenly,
and cut off the aluminum foil and guard space. See
l Do not damage the shield layer when removing the jacket.
l Do not damage the insulation layer of the Ethernet cable when removing the shield layer.
Figure 1-41 Removing the jacket of an Ethernet cable
Issue Draft A (2016-03-30)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Aluminum foil
(5) RJ45 connector
Figure 1-41
1 RRU3931E Installation Guide
(3) Braided layer
-
44
Advertisement
Table of Contents
