Table of Contents
Advertisement
RRU3931E
Installation Guide
Figure 1-43 Inserting wires into the RJ45 connector
l When inserting the wires, ensure that the braided layer that was tipped outwards has
l Observe the side or front of the RJ45 connector to ensure that the core wires are inserted to
Step 4 Use a crimping tool to crimp the connector. See
Figure 1-44 Crimping the connector
Step 5 Use a cable cutter to evenly cut off the protruding braided layer of the connector along the
wire holder. See
Figure 1-45 Cutting off the excess braided layer
----End
Issue Draft A (2016-03-30)
NOTICE
inserted inside the connector.
the bottom of the RJ45 connector.
Figure 1-45
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 RRU3931E Installation Guide
Figure
1-44.
46
Advertisement
Table of Contents
