Ethernet/Ip Configuration Main Menu - Siemens FEC920 User Manual

6.7.1 Ethernet/IP Configuration Main menu

Net Status Code
IO Status Code
Tag Status code
Implicit I/O
Multicast
Explicit 1
Explicit 2
Page 96
FEC920: USER GUIDE
Select configuration menu
Channel Main
Virtual Channel Implicit Inputs
Loop Implicit Outputs
Advanced Loop
Programmer
Modbus Master
EtherNet/IP
Figure 85 Client configuration
EtherNet/IP.Main
IO Status Code
Implicit I/O
Explicit 1
Explicit 2
Server Address
Input Instance
Size (Bytes)
Output Instance
Size (Bytes)
Connection Type
RPI (ms)
Reset Comms
Figure 86 Ethernet/IP Main menu
Network status (Server only)
Offline: FEC920 online but there are currently no CIP connections
Online: FEC920 online with at least 1 CIP connection
Connection Timeout: The connection has timed out
Duplicate IP: A duplicate IP address has been detected on the network
Initialisation: FEC920 is initialising comms
IO status (Client (IO) only). As above.
Tag status (Client (Tags) only. See Figure 87, below.
Connected IO server IP address.
Connected IO server IP address (only if multicast selected).
Connected client/server IP address.
Connected client/server IP address.
A5E45696052A Rev-AA
Online
123.123.123.223
No connection
No Connection
Mode Client (IO)
123.123.123.223
100
100
112
100
Point2Point
Priority Scheduled
1000
No
Section 6.7.1
Section 6.7.2
Section 6.7.2
September 18