Configuration - Siemens FEC920 User Manual

6 CONFIGURATION

Entered from the top level menu (Section 5.3) this allows the instrument configuration to be accessed and edited
('Engineer' access level required for full editing).
Caution: Recording is stopped for as long as the instrument login is at Engineer level. This
As shown in Figure 38, below, the instrument configuration is arranged in a number of 'areas', each of which is
allocated its own sub-section within this Section.
Configuration
Go to View
Faceplate cycling (Off)
Operator Notes
Demand archiving
The factory default configuration can be returned to, if required, by entering a special Engineer password, as
described in Section 6.1.6.
Page 46
FEC920: USER GUIDE
means that Input/output circuits are switched off during configuration.
Home
History
Log out
Figure 38 Top level configuration menu
A5E45696052A Rev-AA
Instrument
Network
Group
Channel
Virtual Channel
Modbus Master
EtherNet/IP
Web Server
Digital I/O
DC Output
User Lin
Logic (2 input)
Logic (8 input)
Multiplexer
Math (2 input)
Timer
User Values
Alarm Summary
Real Time Event
Section 6.1
Section 6.2
Section 6.3
Section 6.4
Section 6.5
Section 6.6
Section 6.7
Section 6.8
Section 6.9
Section 6.10
Section 6.11
Section 6.12
Section 6.13
Section 6.14
Section 6.15
Section 6.16
Section 6.17
Section 6.18
Section 6.19
A
September 18