Table of Contents
Advertisement
4.
The display changes to the high value adjust page.
5.
Apply the known high value and wait for the value to stabilize. Enter the High Target Value (the value that
the instrument is to read for the applied input). When all is steady, set 'Confirm High' to 'Yes'.
Instrument.Input Adjust
High Target Value
Confirm High
Channel 1 Value
REMOVAL PROCEDURE
1.
Set 'Remove Adjust' to 'Yes' and operate the scroll button.
2.
Use the scroll and up/down arrow buttons to change the required channel icons from crosses to ticks.
3.
Select Remove IP Adjust to 'Yes' and operate the scroll key. The adjustment is removed from all selected
channels without further confirmation.
Instrument.Input Adjust
Channel 1
Channel 2
Channel 3
Channel 4
Apply Adjust
Remove Adjust
DUAL INPUT CHANNELS
For the dual input channel option, input adjust is carried out as described above, except that for any channel
where dual inputs are configured, the user must initiate adjustment to primary and secondary inputs separately.
As shown in Figure 54, a new field 'Input on Channel' is introduced for this purpose.
Instrument.Input Adjust
Input on Channel
Channel 1
Channel 2
Channel 3
Channel 4
Apply Adjust
Remove Adjust
September 18
FEC920: USER GUIDE
10.00
Yes
9.79
Abort
No
Figure 52 Channel adjustment procedure (3)
Adjusted
Unadjusted
Unadjusted
Unadjusted
Yes
No
Figure 53 Channel adjustment removal
Primary
Unadjusted
Unadjusted
Unadjusted
Unadjusted
No
No
Figure 54 Input adjust top level display (dual input channels)
A5E45696052A Rev-AA
Instrument.Input Adjust
Channel 1
Channel 2
Channel 3
Channel 4
Apply Adjust
Remove Adjust
Instrument.Input Adjust
Channel 1
Channel 2
Channel 3
Channel 4
Remove IP Adjust
Abort
Instrument.Input Adjust
Input on Channel
Channel 1
Channel 3
Apply Adjust
Remove Adjust
Only those channels with 'Type' set to 'Dual mA',
'Dual mV' or 'Dual T/C' appear in the list of second-
ary channels. In this example, only channels 1 and
3 are configured as dual input. (See Section 6.4.1
for channel Type configuration.)
Adjusted
Unadjusted
Adjusted
Unadjusted
Yes
No
Yes
No
Secondary
Unadjusted
Unadjusted
No
No
Page 59
Advertisement
Table of Contents
