Table of Contents
Advertisement
This allows tag names to be typed in, input tags 1 to 30 being associated with implicit inputs 1 to 30 respectively
and output tags 1 to 30 being associated with implicit outputs 1 to 30 respectively.
In the example above, the value of the parameter with the tag 'Channel 1' will be written to implicit input 1.
Note: 1. Most PLCs have a data buffer limit of 500 Bytes. The total number of bytes being used is
Note: 2. Input data direction is always to the FEC920:
Note: 3. Output data direction is always from the FEC920:
Page 42
FEC920: USER GUIDE
Figure 33 iTools display showing input tags.
given by the equation: Total number of data bytes = (tag length + 10) × the number of
requested tags.
in server mode input data is written to the FEC920 from the client
in client mode, input data is read by the FEC920 from the server device.
in server mode output data is written to the client from the FEC920.
in client mode, output data is read by the server from the FEC920.
A5E45696052A Rev-AA
A
September 18
Advertisement
Table of Contents
