General Warnings - ABB MB3000 Series Installation And User Manual

Section 2 Safety Summary

General Warnings

Source Module is Hot! Always manipulate the Source Module with caution: use
the non metallic parts to hold the Source Module.
Disconnect power or take precautions to insure that contact with energized parts
is avoided when servicing.
Always perform troubleshooting procedures on a fully assembled spectrometer
(front/rear panels set in place).
Do not, under any circumstances, remove the warning and caution labels.
Information must be available at all times for the security of the user.
The spectrometer weights 24 kilos. ABB strongly recommends to lift the
spectrometer with the help of another person. Make sure to use proper body
mechanics to lift the spectrometer (bend your knees) otherwise injuries could
occur.
Make sure the system is correctly purged for operation in hazardous locations.
Before analyzing flammable products, equipment MUST be approved by local
inspection authorities.
Do not operate the equipment in the presence of flammable products, condensing
moisture and excessive dust.
Before attempting any maintenance or repair procedure to the equipment make
sure immediate first aid is accessible.
Do not store the spectrometer in an environment with condensing moisture and
excessive dust.
Read this manual thoroughly before using this equipment. If you do not
understand the content of this manual, contact ABB service personnel.
Prior to using the spectrometer, Material Safety Data Sheets (MSDS) of all
samples to be analyzed must be available at all times for the security of the user.
AA003700-01 rev. G. 2.0
General Warnings
5