Section 7 Module Replacement
Detector Module Replacement
Screws are easily inserted and tighten. Do not use excessive force to set the
screws in place, otherwise spectrometer could be damaged.
Removing the Detector Module
The type of Detector module being installed into the spectrometer, is
automatically detected.
The Detector module can be removed and installed without powering OFF the
instrument.
STEP 1
STEP 2
AA003700-01 rev. G. 2.0
Section 7 Module Replacement
With a 4 mm Hex driver, unscrew the 3 captive screws holding the Detector
module into place.
Figure 7- 1. Detector module
Remove the Detector module from the spectrometer: The module is tightly
fitted into the housing, gently pull the module to remove it from the
spectrometer.
Detector Module Replacement
29