To display remote statistics for the Radio Link Module, you must first
connect to the target RLM as described in
RLMs (page
99).
1. To view the remote statistics, select the
Manager window in the monitor mode (see
information).
The performance for each of the interfaces of the selected Access Point
RLM can be displayed. Selecting the interface of your choice from the
The RLM Manager
that provide information about the performance of the selected RLM.
The indicators which provide the main monitoring information is called the
particular diagnostic value:
•
In errors / Bridge in packets
•
Out errors / Bridge out packets
•
Out collisions / Bridge out packets
The following table provides diagnostic information relating to each of these
three ratios.
110
pull down menu.
tab statistics display a wide range of variables
. There are three ratios which are of
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
Connecting to Access Points
tab from the RLM
Figure 21 Remote Statistics
C79000-G8976-C171-01