Table of Contents
Advertisement
•
The different radio channels used by the Access Points RLMs.
2. (Optional) Click the
networks.
3. Click the network of your choice to return to the Site Monitor tab and
display the diagnostic indicators
i
For reasons of security, the site monitor will not display the network
name, and the MAC address or Radio Link Module names of the
neighboring network. You can display these values only for the
infrastructure network to which you are actually connected.
When the list of
means that:
•
Your CP 1515 Manager station has been configured with a specific
Network Name.
•
This setting will not allow you to scan for/monitor other network
infrastructures. To do so, you will need to reconfigure your station to use
the Network Name "ANY" .
•
There are no other networks operational in the vicinity of your CP 1515
Manager station, or
1. Although the Site Monitor Selection tab will allow you to determine the presence of a
neighboring Independent (Ad-Hoc) network, you can not select this type of networks for Site
Monitor statistics. This is because this feature requires the presence of Access Points RLMs,
that are typically not available in Independent networks (see also
(page
24).
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button to refresh the list of observed
1
.
does not show other networks, this
Wireless Configurations
89
Advertisement
Table of Contents
