To enable spanning tree:
1. Click the
window (see
2. Click the
3. Use default values (see
4. Click
to return to the
5. Click
again if you want to save this configuration and return to the
main RLM Manager window. Otherwise continue changing other
parameters.
At this point, we recommend that you create a backup file, as described in
Step 4 - Create a Back-up of the Configuration (page
The
in protecting the network against message overload as received from a
single station or via a specific port.
The
number of multicast and broadcast messages that will be forwarded from
one port (or address) per second.
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
button to open the Spanning Tree Setup
Figure 38 Spanning Tree Setup
Figure 38 Spanning Tree Setup
button allows you to set parameters that are used
window allows you to determine the maximum
window).
check box;
tab.
66).
window);
205