The filtered protocols are listed in the top section of the
tab. The
factory-set default of the Radio Link Module is
which will allow all
protocols to be transmitted to the wireless medium. This is the
recommended setting when you do not require specific protocols to be
filtered.
To filter specific protocols, proceed as follows:
1. Determine the minimum set of protocols that must be bridged.
2. Click the
button to display the Filter Ethernet Protocols window
pictured in
Figure 37 Select Ethernet Protocols to be
Filtered.
200
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01