Table of Contents
Advertisement
Password parameters you can create different levels of authority for your
LAN Administrators to configure and/or monitor the RLMs.
Use the field
to enter a generic name for the network
supervisor or department, (e.g. "Your LAN Administrator" as pictured in
Figure 41 Setup SNMP
parameters).
Use the field
field to enter a generic logical location of the
Access Point RLM, (e.g. "Incoming Goods Department" as in
Figure
41 Setup SNMP
parameters).
Use the field
to enter a generic physical location of the
Radio Link Module, (e.g. Access Point RLM floor 1N as in
Figure 41 Setup
SNMP
parameters).
If you plan to use the trap alert system as described on
Trap Host Alerts
(page
180), you can use the
field to enter the
address of the network management station that should collect the SNMP
trap messages. If you do not intend to use trap host alerts, the value is set
to "Don't care" .
For more detailed information about trap host messages, see
Trap Host
Alerts (page
180).
214
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
Advertisement
Table of Contents
