Table of Contents
Advertisement
The data displayed in the
vary between 1 second and 5 minutes. Adjust the refresh rate by changing
the SNMP polling interval.
•
Use a short interval (1 second) when you want to monitor remote
statistics on-line, e.g. in case of troubleshooting and/or when you have
full bandwidth access to the RLM via the local network.
•
Use a long interval (5 minutes) when you run remote statistics only for
background display purposes, in cases when you access the network of
the selected Radio Link Module via a low-speed connection (for example
a dial-up modem connection).
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
tab refreshes at regular intervals that can
115
Advertisement
Table of Contents
