Table of Contents
Advertisement
2412 MHz (1)
For wireless networks where wireless cells only have a slight overlap, you
may also experiment with multiple channel configuration using a channel
separation of less than 25 MHz, for example using the channels as listed in
Table 3 Optional Sub-Channel
2412 MHz (1)
6. Click
to close the Wireless Advanced Setup window and return to
the
7 .
(Optional) Repeat steps 3-6 to verify and/or change the frequency for the
second network interface in this Access Point RLM.
8. Click
again to save the new configuration to the Radio Link Module
and to return to the main RLM Manager window.
9. Next create a backup-file of the new configuration (see
Back-up of the Configuration (page
10. Update the "Access Point Configuration Record" in chapter
Configuration"
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
C79000-G8976-C171-01
2437 MHz (6)
Configurations.
2427 MHz (4)
tab.
to reflect these changes.
2462 MHz (11)
2442 MHz (7)
66)).
2457 MHz (10)
Step 4 - Create a
A "Start-up
143
Advertisement
Table of Contents
