Table of Contents
Advertisement
•
The neighboring networks have been "closed" to deny wireless
compliant devices to establish a radio connection when these devices
have been configured with:
a.
The network name "ANY" , or
b.
A zero-string SSID (the equivalent of the network name "ANY").
For more information about "open" and "closed" networks, please
consult
Security (page
You can record the Site Monitor measurement results to a log file, and use
this log file to more fully analyze the overall wireless coverage of your
network. The measurement data can be logged automatically at regular
intervals or manually upon user-command.
For more information on log files, see
The
associated with the MAC address of the wireless network interface(s) of
your Access Points RLMs.
The field
upon configuration
1. To assign a system name to the Access Point RLM, you will need the RLM Manager program
specify this name in the
parameters.
90
154).
tab enables you to create a user-defined list of RLM names
in the Site Monitor window will display the value of the
parameter that has been assigned to the Access Point RLM
1
.
"SNMP Parameters"
Industrial Ethernet Wireless LAN RLM Manager, CP 1515 Manager
5.2.4 Logging Measurement
window as pictured in
Data.
Figure 41 Setup SNMP
C79000-G8976-C171-01
Advertisement
Table of Contents
