Toshiba G3 Instruction Manual page 15

Note
• For the supported G3 I/O modules, refer to "Appendix A.3 G3 I/O Module Support List."
When using G3 I/O module, a combination of the versions
CAUTION as follows is required for PUM12 and nV-Tool.
Controller type
PUM12
Before using GA932, check the versions of PUM12 and
nV-Tool. For information on how to check the versions,
refer to "Engineering Tool 4 Operation Manual–Basic-
(6F8C1290)."
1.1 Functions and Characteristics of GA932 Module
Controller nV-
modules Tool
V01.70 V4.13.1
or later or later
Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual
Mandatory
3