Toshiba G3 Instruction Manual page 5

2. Safety Precautions on Maintenance and Inspection
When installing or removing
the module after wiring, turn
Mandatory
off the external power.
Otherwise, causing an electric shock
by touching conductive part.
Do not drop, crush, or apply
strong shocks to the device or
Prohibited
board.
It may cause failure.
Before touching the device or
board, touch a grounded
Mandatory
metal to discharge the static
electricity of your body.
Otherwise, it may cause malfunction or
failure due to static electricity.
Wipe off stain on the device,
module, or board with a soft
Mandatory
cloth.
For severe stain, use a wet cloth wrung
tightly.
Leaving them stained may cause wrong
decision or malfunction.
WARNING
CAUTION
Place a board or module
removed from the unit or base
Mandatory
unit on a conductive mat or
conductive bag (used for a
backup board, etc.) on a
grounded table.
Otherwise, parts may be damaged due
to static electricity.
Do not use benzene or thinner
to remove stain on device,
Prohibited
module, or board.
It may cause deformation or
discoloration of the device panel,
module, or board.
Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual
iii