3.2 Setting with the Engineering Tool
3.2.1
I/O Node registration
To register a Node using G3 I/O to an I/O Node that belongs to the controller,
follow the steps below. The ranges of I/O Node numbers for which G3 I/O can
be used are shown below.
Table 3-3 Available I/O Node numbers
Available I/O Node number
3 ~ 14 (Hexadecimal: 03 to 0Eh)
type1 light (PUM12)
Register a new I/O Node
Select [I/O Node], and select [File]-[New] from the menu.
Figure 3-6 New I/O Node screen
25
Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual