Toshiba G3 Instruction Manual page 30

Unified controller, i/o adapter module
Hide thumbs Also See for G3:
Table of Contents

Advertisement

Chapter 2 Installation and Wiring
(1) When connecting the GI optical fiber cable with duplex LC connector to TC-net
(2) When pulling out the GI optical fiber cable with duplex LC connector from the
(3) When connecting and disconnecting the GI optical fiber cable with duplex LC
6F8C1590
18
Supplement
I/O loop connector, check for the connector's insertion orientation and insert it
into TC-net I/O loop connector until it "clicks".
connector, do not pull on the cable. Otherwise, it may cause wire break. Ensure
to hold the connector of the GI optical fiber cable with duplex LC connector, and
then pull it out as you press the tab.
connector, avoid the optical fiber cable connector's tab from being bent in the
reverse direction inadvertently. Otherwise, the tab may break and no longer
make a proper connection.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga932Nv series

Table of Contents