Installing The Oil Cooler; Installing The Grass-Basket Hooks - Toro Greensmaster 3420 TriFlex Operator's Manual

secure them with the bolts and nuts
Slide the rubber boot over the positive terminal
to prevent a possible short from occurring.
WARNING
Incorrect battery cable routing could damage
the tractor and cables, causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
1. Negative (-)
2. Positive (+)
5

Installing the Oil Cooler

Optional
Parts needed for this procedure:
Oil Cooler Kit—Greensmaster 3300 Series Traction
–
Unit (Part No. 119-1691 [purchased separately])
Procedure
If you are operating the machine in hot climates,
where the ambient temperature is above 29°C (85°F),
or using it for heavy-duty use (mowing other than
greens, such as fairways or verticutting), install the
optional hydraulic oil cooler kit (Part No. 119-1691).
(Figure
Figure 7
7).
6
Installing the Grass-Basket
Hooks
Parts needed for this procedure:
6 Grass-basket hook
12 Flange bolts
Procedure
Install the 6 grass-basket hooks onto the ends of the
suspension-arm bars using the 12 flange bolts
8).
g005098
1. Flange bolt
2. Grass-basket hook
14
Figure 8
3. Suspension-arm bar
(Figure
g015492