12
Reducing the Tire Pressure
No Parts Required
Procedure
The tires are overinflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before starting the machine; refer to
Pressure (page
42).
13
Burnishing the Brakes
No Parts Required
Procedure
Burnish the brakes; refer to
(page
17).
Checking the Tire
13 Burnishing the Brakes
Product Overview
1. Engine
2. Roll bar
3. Control panel
4. Seat
Controls
Traction Pedal
The traction pedal
(Figure
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For your comfort,
do not rest the heal of your foot on the reverse pad of
the traction pedal when you are driving the machine
forward.
(Figure
14).
17
Figure 12
5. Steering wheel
6. Traction pedal
7. Footrest
8. Cutting units
13) has 3 functions:
g014674