Toro Greensmaster 3420 TriFlex Operator's Manual page 22

3. Using the appropriate graph
8-, 11-, or 14-blade cutting units, determine the
proper reel speed setting.
Figure 19
4. To set the reel speed, on the InfoCenter open
the Main Menu and scroll down to S
5. In the S menu, scroll down to R
ETTINGS
S and use the ± button to set the reel speed
PEED
to the desired number.
Setting the Machine Configuration Passcode
You can set a passcode on the InfoCenter so that
operator's cannot change the following machine
settings without it: R
AISE
T - D , R S
AP OFF ELAY EEL
C , B C
ONTROL LADE OUNT
1. From the S
ETTINGS
S .
ETTINGS
2. Set P S
ROTECT ETTINGS
3. When prompted, enter a 4-digit passcode.
4. Turn the ignition key to O
Note:
If you forget the user defined passcode,
you can obtain a temporary passcode from your
authorized Toro distributor.
Diagnosing the Fault-Log Indicator
The fault-log indicator icon appears on the main
screen in the event of a fault in the machine. When
this icon is present there is a new log entry in
the Faults menu that you or your authorized Toro
distributor can use to identify the problem.
For a list of faults, refer to your authorized Toro
distributor or the Service Manual.
(Figure 18) for 5-,
ETTINGS
EEL
D , L D
ELAY OWER ELAY
, B RPM, C
PEED ACKLAP
, and C (FOC).
LIP
menu, select P
ROTECT
to O .
N
to save the code.
FF
Seat-Adjusting Lever
The seat-adjusting lever is located on the front, left
corner of the seat
the seat forward and rearward.
Note:
If you need to adjust the seat more, you can
remove the 4 nuts that secure the seat slide rails to
the base and move the seat slide rails to the second
set of mounting holes provided.
g014736
.
1. Seat-adjusting handle
,
LIP
22
(Figure 20), allowing you to adjust
Figure 20
g193737