Use Of Instruction; Operator Liability; Qualified Personnel; Returning Devices - ABB 2600T Series Operating Instructions Manual

2.5 Use of instruction

Danger – <Serious damage to health/risk to life>.
indicates that an imminent risk is present. Failure to avoid this will
result in death or serious injury.
Caution – <Minor injuries>.
dangerous situation. Failure to avoid this could result in minor
injuries. This may also be used for property damage warnings.
Important. This message indicates indicates operator tips or
particularly useful information. It does not indicate a dangerous or
damaging situation.
Warning – <Bodily injury>.
dangerous situation. Failure to avoid this could result in death or
serious injury
Attention – <Property damage>.
potentially damaging situation. Failure to avoid this could result in
damage to the product or its surrounding area.

2.6 Operator liability

Prior to using corrosive and abrasive materials for measurement
purposes, the operator must check the level of resistance of all
parts coming into contact with the materials to be measured.
ABB will gladly support you in selecting the materials, but
cannot accept any liability in doing so.
The operators must strictly observe the applicable national
regulations with regard to installation, function tests, repairs,
and maintenance of electrical devices.

2.7 Qualified personnel

Installation, commissioning, and maintenance of the device may
only be performed by trained specialist personnel who have
been authorized by the plant operator. The specialist personnel
must have read and understood the manual and comply with its
instructions.

2.8 Returning devices

Use the original packaging or suitably secure shipping package
if you need to return the device for repair or recalibration
purposes. Fill out the return form (see the end of the document)
and include this with the device.
According to EC guidelines and other local laws for hazardous
materials, the owner of hazardous waste is responsible for its
disposal. The owner must observe the proper regulations for
shipping purposes.
All devices sent back to ABB must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
This message
This message indicates a potentially
This message indicates a potentially
This message indicates a

2.9 Disposal

ABB actively promotes environmental awareness and has an
operational management system that meets the requirements
of DIN EN ISO 9001:2000, EN ISO 14001:2004, and OHSAS
18001. Our products and solutions are intended to have
minimum impact on the environment and persons during
manufacturing, storage, transport, use and disposal.
This includes the environmentally friendly use of natural
resources. ABB conducts an open dialog with the public
through its publications.
This product/solution is manufactured from materials that can
be reused by specialist recycling companies.
2.10 Information on WEEE Directive 2012/19/EU
(Waste Electrical and Electronic Equipment)
This product or solution is subject to the WEEE Directive
2012/19/EU or corresponding national laws. Starting from
August 15th 2018, electrical and electronic equipment marked
with the crossed-out wheeled bin symbol may not be disposed
as unsorted municipal waste. Waste of electrical and electronic
equipment (WEEE) shall be treated separately using the
national collection framework available to customers for the
return, recycling and treatment of WEEE.
Proper disposal prevents negative effects on people and the
environment, and supports the reuse of valuable raw materials.
ABB can accept and dispose of returns for a fee.
2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 7
2 Safety