NEC Electra Elite IPK II General Description Manual page 105

Electra Elite IPK II
When the multiline terminal is idle, the Reverse Voice Over key functions the same as
a Hotline or One-Touch key. A multiline terminal's Reverse Voice Over key also
shows at a glance the status of the associated extension:

R i n g G r o u p s
Ring Groups determine how trunks ring extensions. Generally, trunks ring
extension's only if Ring Group programming allows. For example, to make a trunk ring
an extension:
J
J
Any number of extensions and trunks can be in a specific group. The system allows:
If an extension has a line key for the trunk, Ring Group calls ring the line key. If the
extension does not have a line key, the trunk rings the line appearance key. If an
extension has a key for a trunk that is not in its ring group, the trunk follows Access
Map programming.
R i n g d o w n E x t e n s i o n , I n t e r n a l / E x t e r n a l
With a Ringdown Extension, a user can call another extension, outside number, or
Abbreviated Dialing number by just lifting the handset. The call automatically goes
through - there is no need for the user to dial digits or press additional keys.
Ringdown Extensions are frequently used for lobby telephones, where the caller just
lifts the handset to get the information desk or off-site Reservation Desk.
General Description Manual
When the key is. . .
Off
On
Fast Flash
When the destination extension is idle, the Reverse Voice Over provides one button
calling to the associated extension (like a Hotline key). An extension user cannot,
however, use the Reverse Voice Over key to Transfer calls by one-touch operation.
Assign the trunk and the extension to the same Ring Group.
In the extension's Ring Group programming, assign ringing for the trunk.
Ring Groups = 1~100
N
In-Skin Voice Mail = 102
N
Centralized Voice Mail = 103
N
The associated extension is. . .
Idle
Busy or call ringing
In Do Not Disturb
Document Revision 1
2 - 59